banner
HiLevel ETS2k Q'nApps are listed below. You can also view the list in Brief mode.
Each Q'nApp has a Microsoft Word version available for download at the bottom of the page, or you can download the entire set of of these notes in one file. Please be aware that many of these notes were updated in 2010, so if you haven't downloaded in awhile it would be a good time to download.

        Q'nApps #E1      How can ETS2k help me generate a list of pins
                                      and associated parameters?

        Q'nApps #E2      How do I transfer simulator vectors into ETS2k?

        Q'nApps #E3      How can I use my ETS for Production Test?

        Q'nApps #E4      Can I use my ETS to test memory devices?

        Q'nApps #E5      How can I control the power supply rise time?

        Q'nApps #E6      How can I disconnect an assigned pin from the DUT?

        Q'nApps #E7      How can I loop through a short set of code 10,000 times?

        Q'nApps #E8      How can I loop until I get a "MATCH" on my vectors?

        Q'nApps #E9      How can HiLevel help me with IDDQ testing?

        Q'nApps #E10    How does the HiLevel Curve Tracer work?

        Q'nApps #E11    What is the purpose of the HiLevel TestBox?

        Q'nApps #E12    How can I best organize my small production runs
                                    without the use of an IC handler?

        Q'nApps #E13    If I’m unlucky enough to have a chip but little else,
                                    how should I go about testing it?

        Q'nApps #E14    How can I use ETS2k for high volume production testing?

        Q'nApps #E15    What is the purpose of ‘Special Script’?

        Q'nApps #E16    What should I know about the ETS2k files?

        Q'nApps #E17    What are the Stimulus Formats?

        Q'nApps #E18    What should I know about prober fixtures?

        Q'nApps #E19    What is the purpose of the little red question mark?

        Q'nApps #E20    What about connecting Power and Ground?

        Q'nApps #E21    Can I make my ETS2k software “portable”?

        Q'nApps #E22    Bypass caps? Who needs 'em?

        Q'nApps #E23    How do I use the "Inhibit Delay" in the Pin Setup?

        Q'nApps #E24    How does HiLevel define "data" and "clock" rate?

        Q'nApps #E25    How are the HiLevel drivers and receivers connected?

        Q'nApps #E26    What must be done to prepare for a functional test?

        Q'nApps #E27    How do I use the External Clock?

        Q'nApps #E28    Can AutoFind locate tristated outputs?

        Q'nApps #E29    Will my old tests run on my new HiLevel?

        Q'nApps #E30    How do I use the Swap Pins function?

        Q'nApps #E31    Can I search the Comment field?

        Q'nApps #E32    What is the Symbolic Addressing Mode?

        Q'nApps #E33    Can vectors be masked from the Analysis capture?

        Q'nApps #E34    Can I use my old DUT boards on my new HiLevel?

        Q'nApps #E35    What settings should I use for the loads and DCPMU?

        Q'nApps #E36    What is the functional description of HiLevel's
                                      Memory Test feature?

        Q'nApps #E37    How do I use MultiSite?

         Q'nApps #E38    Why Static Test Vector Memory?

        Q'nApps #E39    How can I eliminate the PRG "attachment" from my SET file?

        Q'nApps #E41    How do I get started on my new ETS?

        Q'nApps #E42    What is Split I/O?

        Q'nApps #E43    What is BitMap and how do I use it?

        Q'nApps #E44    Can I make my vector file track my SET file?

        Q'nApps #E45    Can I measure for pin-to-pin continuity?

        Q'nApps #E46    What is TDR and how does it work?

        Q'nApps #E47    Can I add more header information to AutoTest logfiles?

        Q'nApps #E48    How do you customize the AutoTest logfile format?

        Q'nApps #E49    How do I test a PLL?

        Q'nApps #E50    What is Run & Sample in the DCPMU?

        Q'nApps #E51    Can DUT Continuity be tested faster?

        Q'nApps #E52    Can I use My Favorite Editor by default?

Q'nApps #E53    How do you use the loopback tests?

Q'nApps #E54    What can I do in Demo mode?

Q'nApps #E55    How can I define ACPMU tests?
2166 Michelson, Irvine CA, 92612